Phoenix Epoxy Co. installs garage, commercial, industrial, and residential epoxy flooring across Phoenix and the Salt River Valley. Our work includes polyaspartic and epoxy flake coatings, metallic epoxy, concrete polishing, concrete staining, and grind-and-seal finishes. We serve spaces ranging from two-car garages to retail showrooms and warehouses, with systems selected for the slab, traffic, sun exposure, and desired finish. Every recommendation begins with an on-site look at moisture, cracks, existing coatings, and surface condition.
Phoenix slab surfaces can climb past 140°F and swing more than 50 degrees between day and night, putting serious stress on unprepared coatings. We mechanically grind or shot-blast concrete and follow ICRI surface-preparation guidelines and ACI concrete standards before the primer goes down. Our insured and bonded company operates under Arizona Registrar of Contractors licensing requirements and uses manufacturer-certified materials. Instead of guessing from the phone, we walk the slab, test moisture, map cracks, and prepare a project-specific estimate.
A typical two-car garage of roughly 400-500 square feet can finish in one to two working days when a quick-cure system fits the job. Polyaspartic formulations may be recoat-ready in as little as one to four hours, while epoxy generally requires 24-72 hours per coat. We explain the coating build, cure schedule, finish options, and care requirements before work begins.
Coating performance begins below the finish. We assess moisture vapor, map cracks, remove weak or peeling material, and mechanically create the concrete surface profile the selected primer requires. When slab testing calls for it, the system can also include a moisture barrier before the color base and topcoat.
Published planning ranges run roughly $3,000-$10,000 for a 1,000-square-foot space and $1,200-$4,500 for a 20-by-20, 400-square-foot garage, depending on the system and slab condition. Crack repair, moisture mitigation, coating thickness, and decorative finishes can move a project within those ranges. We provide the real number after inspecting the floor, then put the recommended system, preparation, and finish details in writing.
A home garage, retail showroom, industrial warehouse, and washdown area do not need the same floor. We match build thickness, chemical resistance, UV stability, texture, and finish to how the space will be used, from solid-color and metallic designs to accent flake or full-broadcast flake with 100% coverage. Where a coating is not the right fit, we can explain concrete polishing, staining, or grind-and-seal alternatives.
Phoenix spans 517.9 square miles, with over 1.6 million residents in the city and 5.19 million across the metro. Our vision is to make professionally prepared, climate-appropriate concrete floors practical for the homes, showrooms, kitchens, clinics, and warehouses that keep that region moving. That means accounting for desert grit, monsoon moisture, direct sun, hot-tire pickup, chemical exposure, foot traffic, and heavy equipment instead of treating every slab alike.
Our mission is to install floors whose performance, appearance, schedule, and upkeep are clear from the start. With proper installation and routine care, residential epoxy commonly lasts 10-20 years, while industrial floors under heavy forklift traffic may need a topcoat refresh within 5-10 years. We provide care guidance for routine sweeping, occasional mopping, and neutral-pH cleaning so each customer knows how to protect the finished surface.